Ubuntu: nVidia card slow? 우분투 : nVidia의 카드가 느려? Monitor flickers? 모니터 깜박임? Try this fix and boost graphic card performance! 이 문제를 해결하려고하고 그래픽 카드의 성능을 향상!
Posted on 22. 22 게시됨. Nov, 2009 by Dragos in Operating Systems , Ubuntu 11 월, 2009 운영 체제, 우분투에서 드라 고스에 의해
Switching from an ATI card to an nVidia one was not so simple, as X was configured to work with an ATI card. 로 X ATI의 카드와 함께 작동하도록 구성된 ATI의 카드에서 nVidia의 한 스위칭 그렇게 단순 한게 아닙니다이었다. What I had to do was to boot in Safe Gnome, download the nVidia drivers to my desktop, then enter the command line screen (pressing CTRL+ALT+F1), delete and reinstall X, edit /etc/X11/xorg.conf to use vesa drivers, install the nVidia drivers from my desktop, and then enjoy full video performance. 내가 뭘해야만 안전 그놈에서 부팅하려면, 내 바탕 화면에 다음 명령줄 화면 (CTRL 키를 눌러 입력 NVIDIA 드라이버를 다운로드 + ALT + F1을), 삭제 및 X를 다시 설치, 편집 / etc/X11/xorg.conf했다 VESA의 드라이버를 사용하여 내 바탕 화면에서, 그리고 NVIDIA 드라이버를 설치하는 전체 비디오 성능을 즐길 수있습니다. If you fail to do these steps, then you will run into a blank screen right after you log into your account. 만약 당신이 이러한 단계를 수행하려면, 후 귀하의 계정에 로그인할 다음 빈 화면으로 바로 실행됩니다 실패합니다.
But even with the latest official nVidia drivers installed, the GUI inside Ubuntu will not be as smooth as expected. 하지만 공식적인 최신 NVIDIA 드라이버를 설치 GUI는 우분투 안에서도있을만큼 예상대로 원활하게되지 않습니다. To fix this, you'll need to install compizconfig-settings-manager from synaptic. 이 문제를 해결하려면 - 설정 시냅스에서 compizconfig 매니저를 설치하셔야합니다.
After you install compizconfig-settings-manager, open it from System->Preferences->Compizconfig settings manager: 후 - "환경 설정 시스템에서 오픈"Compizconfig 설정 관리자 설정 매니저, compizconfig 설치 :
Then select the “ All ” category and go to “ General options “: 그렇다면 "전체"카테고리를 선택하고 "일반 옵션"으로 이동 :
Then make sure that Detect Refresh Rate is unticked, Sync to VBlank is ticked and that the Refresh Rate is set to a slightly more number than your monitors refresh rate (if unsure, set it to 100): 그리고 그 검색 리프레시 속도, unticked입니다 동기화 VBlank에 고물가와 리프레시 속도 모니터 재생 빈도보다 약간 더 많은 숫자로 설정되어 있는지 확인 (만약, 확실하게 100로) 설정 :
You should now see no more window flickering and dragging a window on the screen should be smooth and fast. 이제 더 이상 창이 나타납니다 깜박거리는 화면에 창을 드래그해야 부드럽고 빨라. If you see no results, try to restart Compiz ( ALT+F2 and run Compiz ). 만약 당신이 결과를 볼 수없습니다 (ALT + F2를 컴피즈 실행) 컴피즈를 다시 시작하려고합니다.
Related posts: 관련 게시물 :
- Ubuntu: Karmic Koala 9.10, should I buy you an nVidia or ATI video card? 우분투 : Karmic 코알라 9.10, 난 당신의 nVidia 또는 ATI 비디오 카드를 구매해야합니까?
- Ubuntu hacks: Extend visual effects in compiz. 우분투는 해킹 : 컴피즈의 시각적 효과를 확장합니다. More settings, more fun 기타 설정, 재미도 더
- Ubuntu: How to upgrade from Ubuntu Jaunty Jackalope 9.04 to Ubuntu Karmic Koala 9.10 우분투 : 어떻게 Jaunty Jackalope 우분투 9.04에서 우분투 Karmic 코알라 9.10로 업그레이 드하려면
- OS: RAM difference between Ubuntu x86 (32 bit with physical address) and Ubuntu x64 (64 bit) 운영 체제 : 우분투 x86 물리적 주소 (32 비트) 및 우분투의 x64 (64 비트) 사이의 RAM의 차이점
- Ubuntu: How to play online radio stations in Exaile (open .pls playlists) 우분투 : 어떻게 Exaile (오픈 온라인 라디오 방송국을 재생합니다. pls 재생 목록)















































