Ubuntu: nVidia card slow? Ubuntu: nVidia धीमी कार्ड? Monitor flickers? मॉनिटर flickers? Try this fix and boost graphic card performance! इसे ठीक करने की कोशिश करो और ग्राफिक कार्ड के प्रदर्शन को बढ़ावा देने!
Posted on 22. 22 पर तैनात हैं. Nov, 2009 by Dragos in Operating Systems , Ubuntu नवम्बर, 2009 आपरेटिंग सिस्टम, Ubuntu में Dragos द्वारा
Switching from an ATI card to an nVidia one was not so simple, as X was configured to work with an ATI card. एक अति कार्ड से एक nVidia एक को परिवर्तित किया गया इतना सरल नहीं है, के रूप में एक्स के लिए एक अति कार्ड के साथ काम कॉन्फ़िगर किया गया. What I had to do was to boot in Safe Gnome, download the nVidia drivers to my desktop, then enter the command line screen (pressing CTRL+ALT+F1), delete and reinstall X, edit /etc/X11/xorg.conf to use vesa drivers, install the nVidia drivers from my desktop, and then enjoy full video performance. मुझे क्या करना था सुरक्षित सूक्ति में बूट करने गया था, अपने डेस्कटॉप को डाउनलोड nVidia ड्राइवरों, तो कमांड लाइन स्क्रीन (Ctrl दबाव में प्रवेश + ऑल्ट + F1) को हटाना, और एक्स पुनर्स्थापना, संपादित करें / etc/X11/xorg.conf को उपयोग vesa ड्राइवर, अपने डेस्कटॉप से nVidia ड्राइवरों स्थापित करें, और फिर पूरी वीडियो प्रदर्शन का आनंद लें. If you fail to do these steps, then you will run into a blank screen right after you log into your account. यदि आप इन कदमों का असफल हो, तो तुम एक खाली स्क्रीन में सही चलाने के बाद आप अपने खाते में प्रवेश करेंगे.
But even with the latest official nVidia drivers installed, the GUI inside Ubuntu will not be as smooth as expected. लेकिन ताजा सरकारी nVidia स्थापित ड्राइवरों, Ubuntu अंदर जीयूआई के साथ सहज रूप में नहीं होगी के रूप में उम्मीद की थी. To fix this, you'll need to install compizconfig-settings-manager from synaptic. इसे ठीक करने के लिए, आपको-सेटिंग्स-synaptic से प्रबंधक compizconfig स्थापित करने की आवश्यकता होगी.
After you install compizconfig-settings-manager, open it from System->Preferences->Compizconfig settings manager: तुम्हारे जाने के बाद, सेटिंग्स, प्रबंधक, compizconfig यह सिस्टम से> वरीयताएँ मुक्त> Compizconfig सेटिंग्स प्रबंधक स्थापित करें:
Then select the “ All ” category and go to “ General options “: फिर "सभी" श्रेणी का चयन करें और जनरल के विकल्प "के लिए" जाओ:
Then make sure that Detect Refresh Rate is unticked, Sync to VBlank is ticked and that the Refresh Rate is set to a slightly more number than your monitors refresh rate (if unsure, set it to 100): तो यकीन है कि पता लगाने के ताज़ा दर, unticked VBlank को तुल्यकालित ticked है और यह है कि ताज़ा दर पर नज़र रखता है तुम्हारी ताज़ा दर की तुलना में थोड़ा अधिक संख्या को निर्धारित कर रहा है (अगर अनिश्चित, यह 100 के लिए सेट):
You should now see no more window flickering and dragging a window on the screen should be smooth and fast. अब आप कोई और अधिक अस्थिर खिड़की से देखना चाहिए और स्क्रीन पर एक खिड़की को खींच सकता है और आसानी से तेजी से होना चाहिए. If you see no results, try to restart Compiz ( ALT+F2 and run Compiz ). यदि आप कोई परिणाम नहीं देखते हैं, को Compiz (आल्ट + F2 और Compiz रन) को पुनः आरंभ करने की कोशिश करो.
Related posts: संबंधित पोस्ट:
- Ubuntu: Karmic Koala 9.10, should I buy you an nVidia or ATI video card? Ubuntu: Karmic कोअला 9.10, मैं तुम्हें एक nVidia या अति वीडियो कार्ड खरीदना चाहिए?
- Ubuntu hacks: Extend visual effects in compiz. Ubuntu हैक्स: compiz में दृश्य प्रभाव बढ़ाएँ. More settings, more fun अतिरिक्त सेटिंग्स, और अधिक मज़ा
- Ubuntu: How to upgrade from Ubuntu Jaunty Jackalope 9.04 to Ubuntu Karmic Koala 9.10 : Ubuntu Ubuntu कैसे बिना इजाजत Jackalope 9.04 से 9.10 Ubuntu Karmic कोअला को उन्नत बनाने के लिए
- OS: RAM difference between Ubuntu x86 (32 bit with physical address) and Ubuntu x64 (64 bit) ओएस: x86 Ubuntu (भौतिक पते के साथ 32 बिट) और x64 Ubuntu (64 बिट राम के बीच अंतर)
- Ubuntu: How to play online radio stations in Exaile (open .pls playlists) : Ubuntu कैसे Exaile खुला (ऑनलाइन रेडियो स्टेशनों में खेलने के लिए. Pls प्लेलिस्ट)















































